New from Panasonic, the WV-NP472 directly connects to either digital or analogue devices. Simply set the IP address and connect it to an Ethernet terminal for monitoring and control from a PC, or use the analogue video out to connect to conventional monitoring systems using coaxial cable.
The WV-NP472 camera utilizes Panasonic's Super Dynamic II technology to capture images in difficult lighting conditions.
The day/night switching automatically switches from colour to black and white when the light levels drop. It operates in light as low as 0.8 lux in colour mode and 0.1 lux in black and white.
The WV-NP472 is designed for monitoring over a WAN or the internet and its wide range of functions make it ideal for such applications as banks, offices and retail outlets.
Camera Function
Pick up device
1/3 type CCD Sensor
Effective pixels
753 (H) x 582(V) pixels
Synchronization
Internal or multiplexed vertical drive (VD2) sync
H Resolution
570 line at B/W mode, 0.8 lx at colour mode
Min Illumination
0.1 1x at B/W mode, 0.8 1x at colour mode at F1.4
S/N ratio
50 dB (at AGC mode)
D-Range
46dB (typical)
Lens mount
CS-mount
Super dynamic II
on/off selectable
Electronic sensitivity up
fix: 32x (max), auto: 10x (max)
Motion Detection
On/Off selectable
Colour/B/W select
On/Off/Auto selectable
Network Function
Image compression type
JPEG
Image size
JPEG:VGA (640x480), HGVA (640x240), QVGA (320x240) and QVGA (160x120)
Protocol
TCP/IP, HTTP, FTP, SMTP, DHCP
Alarm activation
Alarm input, motion detection
Alarm Notice
Alarm output/mail by email
Alarm log
Maximum 100
Alarm recording
Multi-shot
Interface
10Base-T/100Base-TX (RJ-45 x 1)
General
Video output
VBS 1.0V (p-p)/75ohms, PAL composite signal
Parallel Port
Alarm input x 1, alarm output x 1, Aux output x 1, B/W/colour select
Power supply
DC12V
Ambient operating Temp.
-10 degree - +50 degree
Dimensions
67(W)x65(H)x118(D)
Weight (approx)
510g (except AC adaptor)